VapeZOO
VapeZOO
  • Home
  • HexOhm
  • EVOLV
  • eLiquids
  • Support
  • FAQ
  • hexgantibaju
  • HEXTUKARTAMBAH
  • hexnfc
  • Klaim Garansi
  • wallpaper
  • More
    • Home
    • HexOhm
    • EVOLV
    • eLiquids
    • Support
    • FAQ
    • hexgantibaju
    • HEXTUKARTAMBAH
    • hexnfc
    • Klaim Garansi
    • wallpaper
  • Home
  • HexOhm
  • EVOLV
  • eLiquids
  • Support
  • FAQ
  • hexgantibaju
  • HEXTUKARTAMBAH
  • hexnfc
  • Klaim Garansi
  • wallpaper

EVOLV DNA 60 COLOR

DNA 60 COLOR

      The Evolv DNA60C is a 60 watt power regulated digital switch-mode DC-DC converter for personal vaporizers and the successor to the industry shaping DNA60. As before it features Evolv’s patented Wattage Control, patented Temperature Protection, Preheat, Digital User Controls, Onboard Buttons and Synchronous Rectification for maximum battery life and minimal heat generation. In addition to this the board has been updated with a Colour TFT Screen, Replay and a 2a USBC Fast Charge Board (AVAILABLE SEPARATELY). 


DESCRIPTION

      We’ve finally updated the modder’s favorite board with the DNA 60c. The 60c brings some new updates and features that vapers and modders have requested

* A color TFT screen that displays the battery level, wattage, coil temperature, resistance, and more. The screen layout can also be customized using EScribe.

* Replay functionality which allows you to save and replay your favorite puff and as a bonus prevents the coil from overheating.

* A USB-C charge board (AVAILABLE SEPARATELY) that supports 2A fast charging, which can charge your device faster and more efficiently.

* Supports a single cell lithium polymer battery that can be either removable or built-in. The battery can be recharged via the USB port or an external charger.

* An output power range from 1 to 60 watts, and can handle resistances from 0.1 ohm to 3.0 ohm.

* Supports temperature control for Ni200, Ti, SS, and custom wire types and custom profiles like the other color DNA boards.

Evolv DNA 60 C Datasheet can be found here.

2A USB C STEP here.

DNA 60 C WITH SCREEN STEP here.

Evolv Escribe Software can be found here.

For further discussion, profiles, themes and more, visit the Evolv DNA Forum.

EVOLV DNA 80 COLOR

DNA 80 COLOR

      The Evolv DNA80C is the ultimate choice for boro and side-by-side mods.

With up to 80 watts of power, a large vibrant color TFT screen, and 3A USB-C fast charging, this board guarantees top-tier performance.

Enjoy advanced features like Replay and Boost modes, customize your experience with EScribe software, and benefit from built-in safety with reverse voltage protection.

Perfect for custom or production devices that demand precision, power and reliability in a compact form factor. 


DESCRIPTION

      Evolv DNA 80C board is the ultimate choice for boro mods.

With its innovative design and advanced capabilities, this board is unique. Capable of delivering up to 80 watts of power, it accommodates a wide range of vaping styles, ensuring a satisfying and a customizable experience for every user.

Its vibrant color TFT screen makes navigating through various menu’s and settings both clear and intuitive, providing real-time data at a glance. One of the standout features of the DNA80C is its 3A USB-C fast charging capability, which drastically reduces downtime. This means you can charge an 18650 battery from 3.0V to 4.2V in about an hour, and a 21700 battery in approximately 1.33 hours. Beyond fast charging, the device boasts innovative modes such as Replay and Boost, which ensure consistent performance and enhanced initial puff experiences.

Customization is at the forefront of the DNA80C, using EScribe, our configuration software. This allows users to fine-tune their vaping preferences in ways that standard boards simply can’t match. Safety features are also a major focus, with built-in reverse voltage protection and cell monitoring to guarantee reliable and secure usage. EScribe is available for both PC and Mac, and all you have to do is connect your device via USB to update firmware or change settings.

Ideal for DIY modders seeking precision, customization, and exceptional performance in a compact design, the DNA80C is a top-tier choice that stands out in any setup.


Key Features:

80 Watts of Power: Delivering up to 80 watts, the DNA80C ensures reliable and customizable power for a variety of vaping styles.

Compact Form Factor: Specifically designed for boro and side-by-side mods, the DNA80C’s compact size allows for seamless integration into your custom builds.

Replay & Boost: Replay mode ensures consistent performance by replicating your preferred puff while Boost mode enhances initial puff performance for a more satisfying experience.

3 Amp USB-C Fast Charging: Equipped with 3A USB-C fast charging, this board minimizes downtime. For example:
Charge an 18650 battery (3000mAh) from 3.0V to 4.2V in approximately 1 hour.
Charge a 21700 battery (4000mAh) from 3.0V to 4.2V in around 1.33 hours.

Full Color TFT Screen: The vibrant color TFT screen provides clear, real-time information on your settings and device status, making adjustments effortless.

EScribe Software for Custom Personalization: Use our downloadable EScribe software to fully customize and personalize your vaping experience, adjusting power curves, preheat settings, and much more.

Onboard Safety Features include reverse voltage protection and cell monitoring for enhanced safety and reliability.


Specifications:

Power Output: 1W – 80W
Input Voltage: 3.0V – 4.2V
Display: Color TFT Screen
Charging: 3 Amp Fast Charge via USB-C port


Why Choose the Evolv DNA80C?

The DNA80C is not just another vaping board; it’s a sophisticated tool for vapers seeking precision, customization, and reliable performance. Ideal for custom mod builders and production mods alike, the DNA80C combines cutting-edge technology, user-friendly design, and powerful features in a compact, versatile package.


Evolv Escribe Software can be found here.

For further discussion, profiles, themes and more, visit the Evolv DNA Forum.

EVOLV DNA 60

DNA 60

       The DNA 60 is a 60 watt power regulated digital switch-mode DC-DC converter for personal vaporizers. It features Evolv’s patented Wattage Control, Patent Pending Temperature Protection, Preheat, Digital User Controls, OLED Screen, Onboard Buttons and Synchronous Rectification for maximum battery life and minimal heat generation. The DNA 60 runs from a single cell lithium polymer battery. The USB port and Evolv’s EScribe software can be used to monitor and customize the user experience. The DNA 60 is vaping down to a science.

NOTE: DNA 60s are shipped with Large Screen firmware. To use a Small Screen, go to Tools → Apply Service Pack in EScribe, and select a firmware from the DNA 60 Small Screen directory.


DESCRIPTION

       The DNA 60 is a 60W power regulated digital switch-mode DC-DC converter for personal vaporizers. It features Evolv’s patented Wattage Control, Patent Pending Temperature Protection, Preheat, Digital User Controls, OLED Screen, Onboard Buttons and Synchronous Rectification for maximum battery life and minimal heat generation. The DNA 60 runs from a single cell lithium polymer battery. The USB port and Evolv’s EScribe software can be used to monitor and customize the user experience. The DNA 60 is vaping down to a science.

NOTE: DNA 60s are shipped with Large Screen firmware. To use a Small Screen, go to Tools → Apply Service Pack in EScribe, and select a firmware from the DNA 60 Small Screen directory.

The DNA 60’s dimensions make it an ideal choice for incorporation into smaller devices. 

Please see below for further information and specifications.

The DNA 60 by Evolv

Features:

  • Wattage Output Range: 1-60W
  • Voltage Output Range: 0.2-9V
  • 85% Output Efficiency
  • Temperature Range: 200-600°F / 93 – 315°C
  • Temperature Control supports Ni200 Nickel, Titanium, and Stainless Steel. Add custom wire specific TFR/ TCR Curves via the EScribe suite.
  • 128×32 or 96×16 OLED screen
  • Preheat /Boost Functionality
  • Reverse Polarity Protection
  • Low Resistance Protection
  • Short Circuit Protection
  • Overheat Protection
  • Low Voltage Protection
  • Optional MicroUSB Board – Firmware Upgrades/ 1A Charging.

PLEASE NOTE: Evolv DNA 60s are shipped with Large Screen firmware.

To use a Small Screen, go to Tools → Apply Service Pack in EScribe, and select a firmware from the DNA 60 Small Screen directory.

Evolv DNA 60 Datasheet can be found here.

Evolv Escribe Software can be found here.

For further discussion, profiles, themes and more, visit the Evolv DNA Forum.

EVOLV DNA 75 COLOR

DNA 75 COLOR

        The DNA 75 Color is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It features Evolv’s patented Wattage Control, Patent Pending Temperature Protection, Preheat, Onboard Buttons, Synchronous Rectification for maximum battery life and minimal heat generation, and a 160 x 80 pixel Color TFT Screen. The DNA 75 Color runs from a single cell lithium polymer battery.

Evolv’s EScribe 2.0 and Theme Designer software can be used to make the DNA 75 Color look and act exactly like you want. Designed for ease of use while allowing complete customization, the DNA 75 Color is vaping down to a science.

See below for specifications and more.


DESCRIPTION

        The DNA 75 Color is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It features Evolv’s patented Wattage Control, Patent Pending Temperature Protection, Preheat, Onboard Buttons, Synchronous Rectification for maximum battery life and minimal heat generation, and a 160 x 80 pixel Color TFT Screen. The DNA 75 Color runs from a single cell lithium polymer battery.

Evolv’s EScribe 2.0 and Theme Designer software can be used to make the DNA 75 Color look and act exactly like you want. Designed for ease of use while allowing complete customization, the DNA 75 Color is vaping down to a science.

The DNA 75C by Evolv Features:

  • Wattage Output Range: 1-75W 
  • Voltage Output Range: 0.2-9V
  • Temperature Range: 200-600°F / 93 – 315°C
  • Replay / Temperature Control supports Ni200 Nickel, Titanium, and Stainless Steel. Custom wire specific TFR/ TCR Curves may be added via the EScribe suite.
  • 160 x 80 pixel Color TFT Screen
  • 85% Output Efficiency
  • Preheat / Boost Functionality
  • Reverse Polarity Protection
  • Low Resistance Protection
  • Short Circuit Protection
  • Overheat Protection
  • Low Voltage Protection
  • Integrated USB Connector – Firmware Upgrades / 1A Charging Current

Evolv DNA 75C Datasheet can be found here.

Evolv Escribe Software can be found here.

For further discussion, profiles, themes and more, visit the Evolv DNA Forum.

EVOLV DNA 100 COLOR

DNA 100 COLOR

         The Evolv DNA 100C is a power regulated digital switch-mode DC-DC converter for box mods. The board features Evolv’s patented Wattage Control, Patent Pending Temperature Protection, Preheat, and Replay. The display is provided by a bright 160 x 80 pixel Color TFT Screen. Up to 3a charging is supported via a USB Type C on-board connector. The DNA 100 Color is powered by a single lithium cell and can also be wired in parallel configuration. Perfect for a DNA 100C 21700 mod build. 


DESCRIPTION

         The Evolv DNA100C is a power regulated digital switch-mode DC-DC converter for box mods. The board features Evolv’s patented Wattage Control, Patent Pending Temperature Protection, Preheat, and onboard actuators. The outstanding Replay Mode feature is also included in the default theme. The DNA100c uses Synchronous Rectification for maximal battery life, efficiency and minimal heat generation. The board also features a bright 160 x 80 pixel Colour TFT Screen. The DNA 100 Colour is powered by a single lithium cell and can also be wired in parallel configuration. Up to 3A charging is supported via a USB Type C on-board connector. This board is perfect for 21700 mod builds.

The DNA 100C is user configurable and customisable using Evolv’s EScribe 2.0 and Theme Designer software available here. Designed for simplicity of use whilst allowing complete customization, the DNA100C really is vaping down to a science.

WARNING!

The Evolv DNA 100C deploys a 3A charge rate as default. You must ensure the cell you are charging is capable of handling this. Please contact the cell manufacturer or supplier to confirm your cell’s capability before charging at this rate. Also ensure your batteries are in good overall condition. Aged cells with a raised internal resistance will get hot. Neither Stealthvape nor Evolv will be held liable for any damages or injury resulting from improper use.

The charge rate may be altered to 1.5A in EScribe.


Evolv Escribe Software can be found here.

For further discussion, profiles, themes and more, visit the Evolv DNA Forum.

EVOLV DNA 250 COLOR

DNA 250 COLOR

          The Evolv DNA 250C is a power regulation digital switch-mode DC-DC converter controller board. The DNA 250 Color features Evolv’s patented Wattage Control, Patent Pending Replay and Temperature Protection, onboard actuators and Preheat/ Boost control. The DNA 250C is also equipped with USB On-The-Go, Reverse Polarity Protection, an onboard programmable multicolor LED,
waterproof onboard buttons, and a real-time calendar and clock. The DNA 250C uses Synchronous Rectification for optimal battery life, maximum efficiency and minimum operational heat generation. The board user display utilizes a bright 160 x 80 pixel Color TFT Screen.

Designed for simplicity of use while allowing complete customization, the Evolv DNA 250C is vaping down to a science.. 


DESCRIPTION

          The Evolv DNA 250C is a power regulation digital switch-mode DC-DC converter controller board. The DNA 250 Color features Evolv’s patented Wattage Control, Patent Pending Replay and Temperature Protection, onboard actuators and Preheat/ Boost control. The DNA 250C is also equipped with USB On-The-Go, Reverse Polarity Protection, an onboard programmable multicolor LED,
waterproof onboard buttons, and a real-time calendar and clock. The DNA 250C uses Synchronous Rectification for optimal battery life, maximum efficiency and minimum operational heat generation. The board user display utilizes a bright 160 x 80 pixel Color TFT Screen.

The Evolv DNA 250 Color can be powered using  2S, 3S, or 4S cell lithium polymer battery configurations, capable of outputting either 200, 300 or 400 Watts respectively. The 250C features cell-by-cell battery monitoring and includes an integrated 2A balance charger.

The DNA 250C is fully user customizable and configurable using the Evolv EScribe 2.0 and Theme Designer software, available here.  Escribe software can be used to fully customize all aspects of the user interface and also to monitor the user experience in the Device Monitor facility.

Designed for simplicity of use whilst allowing complete customization, the Evolv DNA 250C is vaping down to a science.

The DNA 250C by Evolv Features:

  • Wattage Output Range: 1-400W (Cell Configuration Dependent)
  • Voltage Output Range: 0.2-10V
  • Temperature Range: 200-600°F / 93 – 315°C
  • Replay / Temperature Control supports Ni200 Nickel, Titanium, and Stainless Steel. Custom wire specific TFR/ TCR Curves may be added via the EScribe suite.
  • 160 x 80 pixel Color TFT Screen
  • 98% Output Efficiency
  • Preheat / Boost Functionality
  • Reverse Polarity Protection
  • Low Resistance Protection
  • Short Circuit Protection
  • Overheat Protection
  • Low Voltage Protection
  • Integrated OTG USB Connector – Firmware Upgrades / 2A Charging / 1A output.


Evolv DNA 250C Datasheet can be found here. 

Evolv Escribe Software can be found here.

For further discussion, profiles, themes and more, visit the Evolv DNA Forum.

Taken from Evolv LLC, redistributed by VapeZoo Indonesia

Copyright © 2025 VapeZOO - All Rights Reserved.

Powered by

  • EVOLV
  • Support
  • Komunitas
  • pemutihan
  • HexOhm Anthem
  • Prosedur Proses Warranty
  • HexEmulator
  • Katchring
  • LegalRDA
  • hexgantibaju
  • hexnfc

Cookie Policy

This website uses cookies. By continuing to use this site, you accept our use of cookies.

DeclineAccept & Close