EVOLV
Vapezoo adalah distributor resmi dari EVOLV DNA untuk Indonesia, dan beberapa produk dari Evolv kalian bisa dapat kan di Tokopedia Vapezoo atau bisa ke Whatsapp kita di bawah ini
FEATURED EXPERT AFFANI HAKIM
Affani Hakim adalah admin dari Facebook Group DNA Indonesia, beliau adalah pakar DNA Chip /eScribe yang sudah sangat lama mendalami Chip DNA.
Seijin beliau kami reshare Tipsnya dibawah ini.
ULTIMATE ESCRIBE SETTING DNA 60, 75, 60C, 75C, 100C, 250C
(Updated 2025)
Setting ini dimaksudkan agar mod DNA anda lebih optimal, batre lebih akurat, TC lebih nikmat, dan yg bagus2 lainnya.
Karena dari pabrikan banyak angka2 yang belum diisi atau hanya diisi default, belum sesuai dengan technical mod nya.
Sebelum memulai,
Save welcome screen atau theme anda sekarang di Escribe.
Sayang kan klo mod mahal2, welcome logo ilang.
Theme --> Theme Designer --> Welcome --> Save
Dalam ECIG file ini sudah saya masukkan:
1. Internal resistance mod
2. Battery setup
3. Material TC (Ni200, NiFe30, NiFe StealthVape, Titanium, SSV Ti, SS316L, SS316L modified)
PROFILE DNA 60 dan 75:
1. POWER
2. Pure MTL (preheat 15W)
3. MTL (preheat 20W)
4. Loose MTL (preheat 25W)
5. RDTL (preheat 30W)
6. DTL (preheat 40W)
7. Loose DTL (preheat 50W)
8. DTL Dual Coil (preheat 60W)
PROFILE DNA 75C dan 250C tinggal dilihat aja, kan semua sudah ada di menu.
Tinggal klik2 ajah buat ganti PROFILE ataupun ganti MATERIAL.
THEME:
Ada tambahan custom screen disana dan disini. Dicobain ajah buat tau bedanya
CARA APLIKASI KE MOD:
1. Save file yg ada di folder ini ke komputer yg akan dipakai ESCRIBE. Ingat, di KOMPUTER, jangan download di hp.
2. Buka Escribe, klik FILE di kiri atas, pilih OPEN
3. Ambil file yg tadi sudah di save, lalu klik Open. namanya harus sesuai mod, DNA75_AH.ecig misalnya untuk DNA75. DNA250C_AH untuk DNA250C, dan seterusnya. Bukan Lucy, Silvy, apalagi Burhan.
4. UPLOAD SETTINGS TO DEVICE. Tunggu loading sampai beres.
5. Selesai
PREHEAT sudah di set di tiap profile untuk DNA non color. Ga bisa ganti preheat kecuali liwat Escribe.
Klo material bisa gonta ganti NiFe, Ti, atau SS di masing2 profile.
CARA GANTI MATERIAL (DNA non color):
1. Masuk ke Profile yang diinginkan.
2. LOCK MOD (firing 5x)
3. pencet FIRING, (+), (-), SEMUA BARENG.
4. Nanti ada pilihan material yang anda mau.
Ga perlu Escribe klo mau ganti material ataupun ganti preheat
(Tinggal pilih aja preheat yg dimau dari 7 profile TC yg ada).
Tetapi kalau mau MENAMBAHKAN MATERIAL harus pake Escribe.
CARA GANTI PROFILE (DNA non color):
1. Lock tombol, dengan cara pencet (+) dan (-) bareng sampai keluar tulisan TEMPERATURE LOCKED atau POWER LOCKED
2. pencet (+) 2x
3. Pilih profile yang anda inginkan sesuai Preheat yang di set di tiap profile
4. Pencet firing
5. Selesai
Kalau hanya main power mode (non TC) gunakan PROFILE 1
Link download: [GDRIVE]
Password: Hakim2025
SELAMAT MENCOBA!
Note:
Jika anda ingin share di group atau komunitas, silahkan. Berikanlah credit ke pembuatnya, jangan asal copas dan jiplak karya orang.
Tunjukkan kalau kita Indonesia bangsa yg besar dan sudah maju 
FB: Affani Hakim
Instagram: affani_hakim
lightnerdouble@gmail.com
EVOLV DNA PRODUCT
DNA 60 COLOR
The Evolv DNA60C is a 60 watt power regulated digital switch-mode DC-DC converter for personal vaporizers and the successor to the industry shaping DNA60. As before it features Evolv’s patented Wattage Control, patented Temperature Protection, Preheat, Digital User Controls, Onboard Buttons and Synchronous Rectification for maximum battery life and minimal heat generation. In addition to this the board has been updated with a Colour TFT Screen, Replay and a 2a USBC Fast Charge Board (AVAILABLE SEPARATELY).
DNA 80 COLOR
The Evolv DNA80C is the ultimate choice for boro and side-by-side mods.
With up to 80 watts of power, a large vibrant color TFT screen, and 3A USB-C fast charging, this board guarantees top-tier performance.
Enjoy advanced features like Replay and Boost modes, customize your experience with EScribe software, and benefit from built-in safety with reverse voltage protection.
Perfect for custom or production devices that demand precision, power and reliability in a compact form factor.
DNA 60
The DNA 60 is a 60 watt power regulated digital switch-mode DC-DC converter for personal vaporizers. It features Evolv’s patented Wattage Control, Patent Pending Temperature Protection, Preheat, Digital User Controls, OLED Screen, Onboard Buttons and Synchronous Rectification for maximum battery life and minimal heat generation. The DNA 60 runs from a single cell lithium polymer battery. The USB port and Evolv’s EScribe software can be used to monitor and customize the user experience. The DNA 60 is vaping down to a science.
NOTE: DNA 60s are shipped with Large Screen firmware. To use a Small Screen, go to Tools → Apply Service Pack in EScribe, and select a firmware from the DNA 60 Small Screen directory.
DNA 75 COLOR
The DNA 75 Color is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It features Evolv’s patented Wattage Control, Patent Pending Temperature Protection, Preheat, Onboard Buttons, Synchronous Rectification for maximum battery life and minimal heat generation, and a 160 x 80 pixel Color TFT Screen. The DNA 75 Color runs from a single cell lithium polymer battery.
Evolv’s EScribe 2.0 and Theme Designer software can be used to make the DNA 75 Color look and act exactly like you want. Designed for ease of use while allowing complete customization, the DNA 75 Color is vaping down to a science.
See below for specifications and more.
DNA 100 COLOR
The Evolv DNA 100C is a power regulated digital switch-mode DC-DC converter for box mods. The board features Evolv’s patented Wattage Control, Patent Pending Temperature Protection, Preheat, and Replay. The display is provided by a bright 160 x 80 pixel Color TFT Screen. Up to 3a charging is supported via a USB Type C on-board connector. The DNA 100 Color is powered by a single lithium cell and can also be wired in parallel configuration. Perfect for a DNA 100C 21700 mod build.
DNA 250 COLOR
The Evolv DNA 250C is a power regulation digital switch-mode DC-DC converter controller board. The DNA 250 Color features Evolv’s patented Wattage Control, Patent Pending Replay and Temperature Protection, onboard actuators and Preheat/ Boost control. The DNA 250C is also equipped with USB On-The-Go, Reverse Polarity Protection, an onboard programmable multicolor LED,
waterproof onboard buttons, and a real-time calendar and clock. The DNA 250C uses Synchronous Rectification for optimal battery life, maximum efficiency and minimum operational heat generation. The board user display utilizes a bright 160 x 80 pixel Color TFT Screen.
Designed for simplicity of use while allowing complete customization, the Evolv DNA 250C is vaping down to a science.
2A USB Charger for DNA 60 / 60 C
Evolv 2A USB-C Data/Charging Board
Description
This is Evolv’s DNA 60 and 60C compatible charge board, capable of up to 2 amp charging, includes data lines for connection to eScribe-compatible boards. Indicator lights RED when charging, and turns OFF when fully charged or disconnected from a battery.
EVOVL DNA 60C SCREEN REPLACEMENT
LCD Screen OEM Replacement only for DNA 60C Authentic EVOLV DNA